Basket (0)
Close
Global leader in new, refurbished, compatible & discontinued multivendor IT-Hardware, spares and print supplies.
| Part Number: | 785067-S21 |
|---|---|
| Manufacturer: | HPE |
| Backup & Storage: | Server Hard Drive |
| Model: | BL420c Gen8, BL460c Gen8/Gen9, BL465c Gen8, BL660c Gen8, DL120 Gen9, DL160 Gen8/Gen9, DL180 Gen9, DL320e Gen8/v2, DL360e Gen8, DL360p Gen8, DL380e Gen8 |
| Description: | Buy HPE 785067-S21 300GB 12G SAS 10K 2.5 Hard Drive. Genuine part with fast worldwide shipping from Euroland IT Store UK. |
| Availability: | In Stock |
The HPE 785067-S21 is a 300GB Enterprise hard drive for ProLiant servers with 2.5 inch SmartDrive bays. It runs at 10,000 rpm over a 12Gb/s SAS link and is listed with the HPE SmartDrive Carrier (SC) included. It is a catalogue variant of the well-known option kit 785067-B21.
Small, fast 10K drives like this one are typically used where quick response matters more than size. Good examples are operating system mirrors, hypervisor boot volumes, transaction logs and small application databases. If you look after a fleet of Gen9 or Gen10 servers, this is a common part to keep on the shelf.
The 785067-S21 is available from Euroland IT Store in New and Refurbished condition, subject to current stock.
| Specification | Details |
|---|---|
| Part number | 785067-S21 |
| Related option kit | 785067-B21 |
| Spare part | 785410-001 |
| Assembly numbers | 768788-001, 781581-005 |
| Capacity | 300GB |
| Interface | SAS 12Gb/s |
| Speed | 10,000 rpm |
| Drive class | Enterprise |
| Form factor | SFF 2.5 inch |
| Carrier | SmartDrive Carrier (SC) |
| Hot-plug | Yes |
| Condition | New or Refurbished, subject to stock |
Resellers list 785067-S21 as a 300GB 12G SAS 10K SFF Enterprise drive with the SmartDrive Carrier, matching the specification of the 785067-B21 option kit. The HPE spare part for this drive is 785410-001. Assembly numbers 768788-001 and 781581-005, and drive models such as EG0300JEHLV, are also reported against it.
Knowing the exact number avoids a common mistake. HPE also sells 300GB SFF drives at 15K rpm and older 300GB drives at 6Gb/s. All of them fit the same bay, but mixing speeds or generations in one array drags performance down to the slowest disk.
The SC carrier was introduced with ProLiant Gen8 and continued through Gen9 and Gen10. Its front panel shows drive activity, a fault or locate signal, and a “do not remove” warning when pulling the drive would break the array. These lights make it much easier for on-site staff to swap the correct disk, especially in a rack full of identical servers.
The carrier is not used in G7 and earlier servers, and most Gen10 Plus and Gen11 models use a newer Basic Carrier instead. Check which bay type your server has before ordering.
New stock is a good choice when you are building out a new server, refreshing a boot mirror before it shows faults, or need parts that have never been in service. See the product page for condition and warranty details on New units.
Refurbished units provide an affordable like-for-like swap for a failed drive. They are often used to support servers in their later years and to build spares kits for remote sites. The product page shows the condition and warranty for Refurbished stock.
This information is based on PartSurfer-derived lists. Confirm your server model, storage controller and current drive label before ordering.
The main option kit is HPE 785067-B21, and the spare part is HPE 785410-001. If your old drive shows an assembly number, look for HPE 768788-001.
If you run several servers built around the same boot drive, one or two shelf spares can save a lot of time. Swap the failed drive, let the mirror rebuild, then order a new spare to replace the one you used. Label the spares with the server models they fit, so anyone on site can pick the right one.
We work with UK businesses, IT teams, resellers and repairers who need dependable server parts. Condition, warranty, stock and delivery information for the 785067-S21 are on the product page. Spend over £100 + VAT and delivery to the UK mainland is free. Email or call our team on 0203 209 6002 with your server model and the part numbers on your existing drive if you want us to confirm the match.
The 785067-S21 suits HPE ProLiant Gen8, Gen9 and Gen10 servers with SFF SmartDrive bays, such as the DL360, DL380 and ML350, though you should check your exact model.
Reseller listings show 785067-S21 with the same 300GB 12G SAS 10K SFF SC specification as the 785067-B21 option kit, whose spare part number is 785410-001.
Yes, subject to stock, and New suits fresh builds while Refurbished is a lower-cost way to replace a failed drive.
The warranty for New and Refurbished units is stated on the product page, and our team is happy to confirm it.
Delivery is free to UK mainland addresses on orders over £100 + VAT, and full delivery details are on the product page.
You must be logged in to post a review.
Reviews
There are no reviews yet.