No products in the basket.
| Part Number: | 683245-001 |
|---|---|
| Manufacturer: | HPE |
| Backup & Storage: | Storage Controller |
| Model: | StoreServ 7200 |
| Description: | Buy HPE 683245-001 StoreServ 7200 Controller. Genuine part with fast worldwide shipping from Euroland IT Store UK. |
| Availability: | In Stock |
683245-001 is the HPE spare part number for the controller node used in the original 3PAR StoreServ 7200, the two node entry model of the StoreServ 7000 family. HPE’s own service documentation describes it as the SPS-Node Module 7200 NO HBA, which tells you two useful things: it is the 7200 node, and it ships without the optional host adapter card.
A 7200 array runs as a node pair. If one node fails, the other keeps serving data, but the system has lost its redundancy until the failed node is replaced. This spare is what restores a 7200 to full two node operation.
We list the 683245-001 in New and Refurbished condition, subject to stock. The warranty for each condition is shown when you select it.
HPE parts for 3PAR use more than one number. 683245-001 is the spare (SPS) number used when ordering through service channels. Resellers also list the same node under QR482-63001, which shares its prefix with QR482A, the part number of the 7200 two node storage base. The 7200c, a later converged model, uses a different node with spare number 756817-001, and the larger StoreServ 7400 uses 683246-001.
Always order the node that matches the model shown on your array. The 7200 and 7200c nodes have different part numbers and different cache sizes, so they should not be treated as interchangeable within a node pair.
HPE’s StoreServ 7000 service guide sets out the process. The failure should first be confirmed and the failed node identified, then the node is shut down with the enclosure still powered on. The SFPs from the onboard Fibre Channel ports, and any PCIe adapter, are moved to the replacement node before it is slid into the enclosure.
When the new node powers up it goes through node rescue, receiving its 3PAR OS from the running cluster over Ethernet. HPE notes that rescue cannot finish without the Ethernet cable connected and that the node can take up to 10 minutes to join. A green LED blinking in step with the partner node shows it has joined. HPE also sets a 30 minute maximum service time for the swap, to avoid overheating.
A New node is unused and suits buyers who want a clean spare for a critical array. Select New to see the warranty.
A Refurbished node is a pre-owned HPE part, usually the most practical way to keep an end of life 7200 running. Its warranty is shown once Refurbished is selected.
| Specification | Details |
|---|---|
| Spare part number | 683245-001 |
| HPE description | SPS-Node Module 7200 NO HBA |
| Linked number | QR482-63001 |
| Array | HPE 3PAR StoreServ 7200 (two node) |
| Onboard host ports | 2 x 8Gb/s Fibre Channel per node |
| Onboard Ethernet | 1GbE management port and 1GbE Remote Copy port per node |
| Expansion | 1 PCIe slot per node |
| Optional adapters | 4 port 8Gb FC, 2 port 10Gb iSCSI/FCoE, 2 port 16Gb FC |
| Array cache | 24GB per node pair |
| Node boot drive spare | 683248-001, one per node |
| Drive enclosures | M6710 2U SFF and M6720 4U LFF |
| Serviceability | Warm swappable, optional customer self repair |
The node is not intended for the 7200c, 7400, 7400c or 8000 series arrays, which each use their own node part numbers.
We deliver within the UK, with options shown at checkout. Before ordering, send us the array model, its serial number and the label details from the failed node so we can confirm the match.
No. The 7200c uses its own node, spare number 756817-001, with a larger cache. Order the node that matches the model on your array.
HPE describes this spare as the 7200 node with no HBA. Any optional FC or iSCSI adapter in your failed node should be moved to the replacement.
No. The node is warm swappable. HPE’s process shuts down only the failed node while the enclosure stays powered and the partner node keeps the array online.
It goes through node rescue when it powers up and loads the OS from the running cluster. The Ethernet cable must be connected for rescue to finish.
The warranty is shown on the product page when you select Refurbished or New. UK delivery options are listed at checkout.
You must be logged in to post a review.
Reviews
There are no reviews yet.