No products in the basket.
| Part Number: | P65254-001 |
|---|---|
| Manufacturer: | HPE |
| Servers Spare Parts: | Server Memory Kit |
| Model: | DL360/DL380 Gen 3/5/11 |
| Description: | Buy HPE P65254-001 32GB DDR5-5600 Server Memory Kit. Genuine part with fast worldwide shipping from Euroland IT Store UK. |
| Availability: | In Stock |
When a 32GB DDR5-5600 DIMM fails in an HPE Gen11 server, P65254-001 is the spare number most often quoted on the service ticket. It identifies HPE’s 32GB dual rank x8 registered Smart Memory module, the same part that is sold as option kit P64706-B21 and labelled on the DIMM as P53626-0A1.
The module runs at up to 5600 MT/s with CAS 46-45-45 timings and EC8 error correction, and it is intended for DL360 Gen11, DL380 Gen11 and other Gen11 Intel servers fitted with 5th Generation Xeon Scalable processors.
P65254-001 is available New and Refurbished, subject to stock. The product page shows the condition and warranty for whichever option you select.
HPE keeps separate numbering for its service stock. A -001 spare carries the same hardware as the -B21 option kit but is the number that appears in PartSurfer, on engineer dispatches and on returned-part paperwork. For this 32GB 5600 MT/s module there are two spare listings: P65254-001, and P68074-001, which PartSurfer describes as “SPS-DIMM,32GB PC5-5600B-R,2Gx8 CN”. Both relate to option kit P64706-B21 and to the module labelled P53626-0A1.
So whether your records show the option, the spare or the label code, the replacement you need is the same 32GB 2Rx8 DDR5-5600 RDIMM.
Gen11 servers were sold with two Intel processor families, and HPE pairs each with a different memory speed grade. QuickSpecs state that 4th Gen Sapphire Rapids processors take PC5-4800B memory only, while 5th Gen Emerald Rapids processors take PC5-5600B or PC5-5200B. This spare is for 5th Gen systems. A 4th Gen server needing a 32GB DIMM should use spare P48501-001 32GB DDR5-4800 instead.
The rated 5600 MT/s applies with one DIMM per channel. When both DIMMs in a channel are filled, HPE lists 4400 MT/s for 5th Gen systems in the DL380a Gen11 QuickSpecs, and individual processor models can set a lower limit.
Use the iLO Integrated Management Log to find the processor and slot that reported the fault. Power the server off, remove the power cords and fit the new module in the same slot. HPE’s Gen11 rules forbid rank mixing and x4 and x8 mixing, so a replacement must match the 2Rx8 organisation of the modules around it. Single rank 16GB kits such as P53624-0A1 are not a substitute.
After the server starts again, open the memory summary in iLO and check that the slot is populated and the total capacity is what you expect. If the log keeps reporting errors on the same slot with a known good module fitted, the fault may lie elsewhere, so it is worth checking the processor seating and the system board before ordering more memory.
A New spare is a good fit when you want unused stock for a repair or upgrade. Select New to see its condition and warranty.
A Refurbished spare keeps repair costs down, which suits servers past their original support period. Select Refurbished to see its condition and warranty.
| Specification | Details |
|---|---|
| HPE spare part | P65254-001 |
| Additional spare listing | P68074-001 |
| HPE option kit | P64706-B21 |
| Module label numbers | P53626-0A1, P53626-0AE |
| Capacity | 32GB |
| Memory type | DDR5 registered DIMM (RDIMM) |
| Rank / organisation | Dual rank, x8 |
| Speed | DDR5-5600 / PC5-44800 |
| CAS latency | CL46 (46-45-45) |
| Error correction | EC8 ECC |
| Voltage | 1.1V |
| Form factor | 288-pin |
| Processor generation | 5th Gen Intel Xeon Scalable |
Reseller data based on HPE information lists P65254-001 for these Gen11 systems with 5th Gen Xeon processors:
Only Gen11 is relevant here. Older DL360 and DL380 generations use earlier memory types, and Gen12 models use DDR5-6400 kits.
UK delivery is available, and you can see the options at checkout. For help confirming the part, send us the server model and serial number along with the details from the DIMM label.
Yes. P65254-001 is the HPE spare number for the 32GB 2Rx8 DDR5-5600 module sold as option kit P64706-B21. The DIMM label usually shows P53626-0A1.
Both are HPE spare listings for the same 32GB 2Rx8 DDR5-5600 registered module. PartSurfer adds a CN marker to the P68074-001 description, but the capacity, speed and organisation are the same.
No. HPE supports only PC5-4800B memory on 4th Gen Xeon processors. Use the 32GB DDR5-4800 spare P48501-001 for those servers.
Choose New or Refurbished on the product page and the warranty and condition for that option are shown.
UK delivery is available, and the options for your address appear at checkout.
You must be logged in to post a review.
Reviews
There are no reviews yet.