HPE P30562-001 2.4TB SAS 10K 512E Server Hard Drive

HPE P30562-001 2.4TB SAS 10K 512e SFF Basic Carrier Spare Drive

HPE P30562-001 is the spare part number for a 2.4TB SAS hard drive designed for HPE ProLiant Gen10 Plus and Gen11 servers. It is a 10,000 rpm, 12Gb/s SAS drive in the 2.5 inch small form factor, formatted as 512e and fitted in the HPE Basic Carrier (BC). The option kit version of the same drive is P28352-B21.

Engineers usually meet this number on a service replacement or on the label of a drive pulled from a newer ProLiant server. It is a good fit for organisations that run large 10K arrays for virtual machines, application data or file services and want a direct replacement when a disk fails.

The P30562-001 is sold by Euroland IT Store in New and Refurbished condition, subject to current stock.

HPE P30562-001 Technical Specifications

What Is The HPE P30562-001?

An Australian HPE parts distributor lists P30562-001 with P28352-B21 as its option equivalent, and a second parts database agrees, adding assembly number P28354-001. Drive models reported under this part are EG002400JWJNN, EG002400JWJNT and EG002400JXLWC.

Those multiple model numbers are expected. HPE sells this drive as Multi Vendor, so units can come from different approved manufacturers while carrying the same HPE spare number and firmware support. When replacing a failed disk, the spare number is the identifier that matters most.

Spare Part Or Option Kit?

Should you buy the spare or the option kit? For a single failed drive, the spare number on the old drive is the natural match. The option kit P28352-B21 is the same drive sold through retail channels for upgrades. In practice, either will work as a replacement in a compatible server. What you must avoid is a 2.4TB drive in the older SmartDrive Carrier, which is built for Gen9 and Gen10 bays.

Multi Vendor Drives In One Array

Because P30562-001 units may contain drives from different suppliers, a replacement may show a different model number from the drive it replaces. HPE qualifies each supplier for the same specification, so the controller treats them as equivalent members of the array. Keep firmware updated through the HPE Service Pack for ProLiant to make sure all drives behave consistently.

New HPE P30562-001

New units suit organisations that keep unused spares for production clusters or need parts that meet a strict procurement policy. The product page lists the condition and warranty for New stock.

Refurbished HPE P30562-001

A Refurbished P30562-001 is a practical way to repair an array without paying for new stock, especially for development, backup or secondary servers. Check the product page for the condition and warranty of Refurbished stock.

Compatibility

• HPE ProLiant Gen10 Plus rack servers, including DL360 and DL380 Gen10 Plus
• HPE ProLiant DL365 and DL345 Gen10 Plus
• HPE ProLiant Gen11 rack servers, including DL320, DL360 and DL380 Gen11
• HPE ProLiant DL385 and DL325 Gen11
• HPE ProLiant ML30 and ML350 Gen11 towers

Check your exact server model, the drive cage type and the controller, and compare the label of the drive you are replacing, before ordering. Lists of this kind may not cover every configuration.

Related Part Numbers

• HPE 881457-B21 (Refurbished): a 2.4TB SAS 12G 10K 2.5 inch listing
• HPE 881507-001: a 2.4TB SAS 12G 10K 2.5 inch spare listing
• HPE 876939-002: another 2.4TB SAS 12G 10K listing
• HPE P54565-001: a 1.8TB SAS 12G 10K 512e drive
• HPE P54682-001: another 1.8TB SAS 12G 10K 512e drive

The option kit for this spare is P28352-B21, shown in the specification table above. See more in our server hard drive range.

Checks Before Ordering

1. Confirm your server is a Gen10 Plus or Gen11 ProLiant.
2. Check the bay uses the Basic Carrier, not the SmartDrive Carrier.
3. Read the old label for P30562-001, P28352-B21 or P28354-001.
4. Confirm 2.4TB, 10K and 512e.
5. Note the controller model and firmware version.

After Fitting The Replacement

Once the new drive is in, the controller should begin rebuilding the logical drive. Track progress in HPE iLO or the controller’s management tool. A 2.4TB rebuild can take a long time under load, so schedule heavy jobs such as backups for after it completes where you can. When the array reports healthy again, order a fresh spare so you are ready for the next failure.

Buying HPE P30562-001 in the UK

Euroland works with businesses, IT teams, resellers and repairers across the UK. For the P30562-001, current condition, warranty, stock and delivery details are on the product page. UK mainland delivery is free for orders above £100 + VAT. If you would like a second opinion on compatibility, send our team your server model and the drive’s part numbers, or call 0203 209 6002.

P30562-001 FAQs

Is the HPE P30562-001 compatible with Gen11 servers?

Yes, it is listed for HPE ProLiant Gen10 Plus and Gen11 servers with SFF Basic Carrier bays, such as the DL360 and DL380 Gen11, but please confirm your model.

Is P30562-001 the same drive as P28352-B21?

Yes, P30562-001 is the spare part number and P28352-B21 is the option kit number for the same 2.4TB SAS 12G 10K SFF BC 512e drive.

Should I buy a New or Refurbished P30562-001?

A New P30562-001 suits production spares and strict buying rules, while a Refurbished one is a cheaper way to repair an array in a working Gen10 Plus or Gen11 server.

What warranty does the P30562-001 have?

Warranty terms differ by condition and are shown on the product page, and our team can confirm them before you buy.

Can I get free UK delivery on the P30562-001?

Yes, orders over £100 + VAT ship free to UK mainland addresses.