HPE 877764-B21 3.84TB SATA 6G RI SFF SSD

HPE 877764-B21 3.84TB SATA 6G Read Intensive SFF SSD

The HPE 877764-B21 is a 3.84TB SATA 6Gb/s read intensive solid state drive in the 2.5 inch small form factor, supplied by Euroland IT Store in both new and refurbished condition. As an HPE option kit, 877764-B21 ships with the digitally signed carrier that HPE ProLiant servers expect, so it drops into a hot-plug bay and is recognised by the Smart Array controller without workarounds.

Read intensive drives are engineered for workloads where data is written once and read many times. At 3.84TB, this drive gives you a dense flash tier for virtual machine datastores, content repositories, analytics platforms, web serving and boot volumes that have outgrown smaller capacities. The SATA 6G interface keeps the cost per terabyte down compared with SAS flash, which is why RI SATA drives remain the default choice for capacity-led flash deployments in ProLiant estates.

Because this is a genuine HPE part, the drive carries HPE firmware, reports wear and health data through iLO and Smart Storage Administrator, and rebuilds predictably inside existing arrays. Fitting HPE 877764-B21 rather than a generic 3.84TB SSD avoids carrier warnings, firmware mismatches and the support headaches that follow.

Euroland IT Store supplies this option kit to IT departments, resellers and data centre teams across the UK, with international shipping available. New sealed stock suits strict procurement policies, while refurbished 877764-B21 drives are tested before dispatch and offer a substantial saving when you are populating multiple bays. Call or email for a quick quote, and our team can confirm fitment against your server model before anything ships.

Key Features

• Genuine HPE option kit part number 877764-B21
• 3.84TB capacity for dense flash storage tiers
• SATA 6Gb/s interface with low power draw
• Read intensive endurance rating for read-heavy workloads
• 2.5 inch small form factor hot-plug design
• Supplied in an HPE smart carrier for ProLiant bays
• HPE firmware with full Smart Array integration
• Wear and health reporting through iLO management
• Strong cost per terabyte compared with SAS flash
• Available new and refurbished from UK stock

Compatibility

• Designed for HPE ProLiant server platforms with SFF hot-plug SATA bays
• Fits selected HPE ProLiant configurations, confirm against your server serial number
• Managed by HPE Smart Array controllers with standard HPE tooling
• Our team can check compatibility against your server model and existing drives before dispatch

Benefits

A single 3.84TB drive replaces several smaller SSDs, freeing bays and simplifying array layouts while keeping read performance consistent under load. Flash also removes the mechanical failure modes of spinning disks, so upgrading a SATA HDD tier to this drive improves reliability and responsiveness in one step. If a drive in an existing array has failed, the matching HP Spare HPE 878855-001 3.84TB SATA RI SSD is the exact-match replacement for this option kit, so degraded logical drives rebuild cleanly.

Refurbished stock brings enterprise flash within reach of tighter budgets, with every unit tested before it leaves us, and new stock remains available where procurement rules demand it. Later generation deployments are covered too, with the HPE P18428-B21 3.84TB SATA SSD and the HPE P00896-B21 3.84TB SATA SFF SSD offering the same capacity point for newer ProLiant systems. Browse the wider range in our SSD hard drive category. If you are pricing a wider refresh, ask about volume rates, as multi-drive orders at this capacity point often unlock further savings on both new and refurbished stock.

Related Products

• HPE 875664-001 3.84TB SATA 6G SFF SSD
• HPE P02562-001 3.84TB SATA 6G SFF SSD
• HPE P40500-B21 Gen10/Gen11 3.84TB 2.5in SATA SSD
• HPE P18485-001 3.84TB SATA 6G 2.5in SSD
• HPE P18428-S21 3.84TB SATA 6G 2.5in SSD
• HPE P41525-001 Gen10/Gen11 3.84TB SATA SSD