HPE 857965-001 10TB 7.2K 3.5″ SAS HDD

HPE 857965-001 Spare 10TB SAS 12G 7.2K LFF Drive with SmartCarrier

HPE 857965-001 is the spare part number for a 10TB, 7,200 rpm, 3.5in hard drive with a 12Gb/s SAS interface, supplied in an HPE SmartCarrier. It is the replacement unit that service engineers and in-house IT staff order when a 10TB member of an HPE ProLiant array fails.

HPE PartSurfer describes it as a 10TB SAS 12G 7.2K LFF SC drive for use with Gen8/Gen9 or newer systems. It is the field spare inside option kit 857644-B21, a Business Critical (Midline) helium drive with 512e sectors and Digitally Signed Firmware.

Stock of this spare is available from Euroland IT Store in New and Refurbished condition, subject to current stock.

HPE 857965-001 Technical Specifications

What Is The HPE 857965-001?

HPE gives each drive two main sales identities. The option kit (here 857644-B21) is what a reseller quotes for a new server build. The spare part, ending in -001, is what HPE support ships for a warranty or service swap. Spare 857965-001 is the 10TB SC drive that sits inside the 857644-B21 kit, so in practice they are the same physical drive under two references.

Ordering by the spare number is sensible when the failed disk in your server carries an 857965-001 label. It removes any doubt about carrier type. HPE also has a 10TB low profile spare, 857966-001, and the two trays are not interchangeable.

Reading the SmartCarrier LEDs Before a Swap

The SC tray is more than a bracket. HPE QuickSpecs describe a status LED, a spinning activity ring, a blue locator LED that the controller or iLO can switch on remotely, and a do not remove indicator. That last one is the most useful during service: if it is lit, pulling the disk would break a logical drive, so wait.

When a 10TB disk fails, the fault LED usually shows amber. Turn on the locator from Smart Storage Administrator or iLO to make sure you pull the correct bay in a crowded 12LFF chassis. Then release the lever, slide out the tray and insert the 857965-001 replacement in the same slot.

New HPE 857965-001

New spares fit sites that keep a sealed replacement on the shelf for each critical server, or that need a fresh unit for a support contract obligation. Check the product page for the packaging and warranty details that apply to new stock.

Refurbished HPE 857965-001

For many businesses a refurbished spare is the sensible way to repair a Gen10 server that is out of HPE warranty. It carries the same HPE number as the original, so the controller recognises it as a like for like part. The condition and warranty for refurbished stock are listed on the product page.

Compatibility: Where HPE Uses This Spare

PartSurfer where-used records for 857965-001 include:

• HPE ProLiant DL380 Gen10 8LFF and 12LFF
• HPE ProLiant DL360 Gen10 4LFF
• HPE ProLiant DL180 Gen10 8LFF and 12LFF
• HPE ProLiant DL360 Gen9 4LFF (OEM build)
• HPE D3600 and D3610 10TB enclosure bundles

This is not a full list. Compare the label on the failed drive, your server model and the controller in use before you place an order.

Associated Numbers and Nearby Options

• HPE 857644-B21: the option kit that contains this spare.
• HPE 857642-002: an HPE drive level number for a 10TB SAS 12G 3.5in 512e helium disk.
• HPE P11186-001: a later 10TB 12G 7.2K 3.5in spare listed for G10 and G11.
• HPE 834132-001: an 8TB SAS 12G 7.2K 3.5in drive.
• HPE 652994-001 LFF blank: a filler for unused 3.5in bays.

Five Checks Before You Order

1. Find the spare number on the failed disk label or the carrier.
2. Check the tray: SC has a front lever and LED ring; LP is shorter and plainer.
3. Confirm the drive is SAS, as a SATA disk will not join a SAS logical drive.
4. Note the capacity; a replacement must be at least as large as the failed member.
5. Update controller firmware if it has not been patched for some time.

Buying HPE 857965-001 in the UK

Since 2002 our Stanmore team has supplied UK businesses, resellers, IT teams and repair specialists with HPE server parts. The product page shows the current condition, warranty, stock and delivery information. Spend more than £100 + VAT and we cover the carriage to any UK mainland address. Send us your server model and the part numbers from the failed disk, or ring 0203 209 6002, and we will help you match the spare.

857965-001 Questions Answered

What is the option kit number for spare 857965-001?

The option kit is 857644-B21, which HPE PartSurfer lists with 857965-001 as its spare part.

Which HPE servers take the 857965-001 spare?

HPE where-used data includes DL360 Gen10 4LFF, DL380 Gen10 LFF, DL180 Gen10 and D3600 or D3610 enclosures, but always check your own server model and drive label before buying.

Is a refurbished 857965-001 a good option for a repair?

Refurbished stock is a cost effective choice for an out of warranty server, while New suits sites that want sealed spares or unused parts in production.

How long is the warranty on this spare?

Warranty terms differ between New and Refurbished stock and are stated on the product page, so please check there.

Can you deliver 857965-001 to anywhere in the UK?

We deliver throughout the UK, with free shipping to mainland addresses on orders over £100 + VAT.