HPE 810764-001 3PAR 600GB 15K 2.5″ HDD

HPE 810764-001 3PAR StoreServ 8000 600GB 15K SFF SAS Drive

HPE 810764-001 is the spare part number for a 600GB, 15,000 rpm small form factor SAS hard drive made for HPE 3PAR StoreServ 8000 storage. It is the field replacement for the option kit K2P98B, which HPE describes as the 3PAR 8000 600GB 15K SFF HDD with All-inclusive Single-system Software.

This drive is aimed at storage teams running 3PAR 8200, 8400 or 8440 systems who need a like-for-like disk for a failed bay or for a cage that is being expanded. In short: 600GB, 15K rpm, 2.5 inch, 12Gb/s SAS, mounted in the 3PAR drive carrier.

Euroland IT Store lists the 810764-001 in New and Refurbished condition, subject to current stock.

HPE 810764-001 Technical Specifications

What Is The HPE 810764-001?

When HPE sold a 600GB 15K disk for a new 3PAR 8000 system, the order line read K2P98B. When the same disk fails and an engineer replaces it, the part that arrives is 810764-001. Both numbers point to one drive type, so either can appear on paperwork for the same disk.

Getting the number right matters on 3PAR more than on most platforms. HPE QuickSpecs state that these drives are only compatible with the 3PAR StoreServ 8000 SAS drive enclosures. A 600GB 15K disk from a ProLiant server, an MSA or an older 3PAR 7000 system will not be accepted as a member of the 8000 drive pool.

Where 15K Drives Fit In A 3PAR Tiered Pool

3PAR arrays group drives into tiers. SSDs give the lowest latency, Nearline disks give the most capacity, and Fast Class spinning disks such as this 15K unit sit between them. A 15K drive turns half as fast again as a 10K disk, which cuts rotational delay and helps random read and write work such as databases, mail stores and virtual machine boot volumes.

If your array uses Adaptive Optimisation, the 15K tier often holds the warm data that has been moved down from flash. Losing one disk there does not stop the array, because RAID protects the data, but the tier runs degraded until the replacement goes in. Mixing a 10K disk into a 15K tier is also best avoided, since the array treats drive speed as part of the tier definition and a slower member can hold back the whole set.

New HPE 810764-001

Choose a new 810764-001 when the array is under a strict change policy or when you are adding a batch of disks and want them all unused. Please check the product page for the exact warranty and packaging offered with new stock.

Refurbished HPE 810764-001

Refurbished units are popular with owners of 3PAR 8000 systems that are past HPE end of support, where a lower-cost spare keeps a working array going. Condition and warranty for refurbished stock are stated on the product page.

Compatibility

• HPE 3PAR StoreServ 8200 (2-node)
• HPE 3PAR StoreServ 8400 (2-node and 4-node)
• HPE 3PAR StoreServ 8440
• HPE 3PAR 8000 SFF drive enclosures attached to these systems

The drive is not for HPE ProLiant servers or MSA arrays. Before ordering, read the label on the drive you are replacing and confirm that your system is an 8000 series model.

Related Numbers And Matching 3PAR Hardware

• HPE K2P93B 3PAR 1.2TB 10K: a larger capacity, slower spinning 3PAR 8000 SFF drive.
• HPE 809813-001 3PAR 8000 128GB SSD: a 3PAR 8000 solid state part listed in our catalogue.
• HPE 792653-001 StoreServ 8400 controller and HPE 809805-001 StoreServ 8200 controller for the node side of the array.
• HPE N9Z18A 3PAR 8000 4-port adapter for host connectivity.
• See all hard drive spare parts.

Replacement Checklist

• Look up the failed disk in the 3PAR management console or CLI and note the cage, magazine and position.
• Confirm the drive type shown is FC class (the 3PAR name for 10K and 15K SAS) at 600GB.
• Compare the label for 810764-001 or K2P98B.
• Check the system is an 8000 series model, not a 7000 or 20000.
• Follow the HPE service procedure for your 3PAR OS version when removing the failed disk.

Buying HPE 810764-001 in the UK

We supply companies, IT departments, resellers and repair shops across the UK with 3PAR spares. The product page shows condition, warranty, stock and delivery information. Free shipping to UK mainland addresses applies once your order passes £100 + VAT. Tell us your 3PAR model and the numbers on your existing drive, or ring 0203 209 6002, and we will check the part with you.

Frequently Asked Questions

Is the HPE 810764-001 the same as K2P98B?

Yes, 810764-001 is the spare part number for the drive sold as option K2P98B, the 3PAR 8000 600GB 15K SFF HDD.

Will this drive work in a 3PAR 7000 or a ProLiant server?

No, HPE states that these drives are only compatible with 3PAR StoreServ 8000 SAS drive enclosures, so check your system model before ordering.

Should I pick a New or Refurbished 810764-001 for my 3PAR?

New stock is unused, while Refurbished stock has been in service before and offers a lower-cost option for older arrays; both depend on availability.

How long is the warranty?

Warranty terms differ by condition and are listed on the product page, which is the place to confirm them.

Can you deliver the 810764-001 within the UK?

Yes, we send orders across the UK, and anything over £100 + VAT ships free to the UK mainland.