HPE 785415-001 1.2TB 12Gb SAS 10K HDD

HPE 785415-001 1.2TB 12Gb SAS 10K SFF Spare Hard Drive

HPE 785415-001 is a spare part number for a 1.2TB, 10,000 rpm SAS hard drive with a 12Gb/s interface in the 2.5 inch small form factor. HPE PartSurfer describes it as a 1.2TB SAS drive for use with Gen7 or earlier models, which sets it apart from the SmartDrive Carrier drives used in Gen8 and later ProLiant servers.

This spare is mostly bought by engineers and IT teams supporting older HPE estates: G7 rack servers, G7 blades and Integrity systems that still run important workloads. It provides Enterprise-class performance and a large capacity for a 2.5 inch slot, with dual-port SAS for multi-path setups.

Find the 785415-001 at Euroland IT Store, offered New or Refurbished, subject to current stock.

HPE 785415-001 Technical Specifications

What Is The HPE 785415-001?

Spare numbers ending in -001 are what HPE service uses when it sends out a replacement part. The option kit that corresponds to 785415-001 is 785079-B21. Assembly numbers 768788-004 and 785087-007 also map to this drive, and reported model numbers include EG1200JEHMC, EG1200JEMDA, EG1200JETKC, EG001200JWFUT and EG001200JWFVA.

Why is the number so important for this part? Because 1.2TB 10K 12G drives were sold for several HPE server generations with different bay designs. The spare 781578-001, for example, is a 1.2TB drive in the Gen8 to Gen10 SmartDrive Carrier. If your server is a G7 model, 785415-001 is the spare aimed at it.

Dual-Port SAS In Blade And Storage Setups

Each SAS drive has two ports. Some HPE blade and shared-storage designs connect both ports to give a second path to the disk. If a cable, expander or controller path fails, the other port keeps the drive reachable. In a standard single-controller rack server, the drive works perfectly well on one port.

Running A 12G Drive On An Older Controller

G7-era Smart Array controllers run at 6Gb/s at most. The 785415-001 drops to that link speed automatically, with no setup needed. Before fitting a larger drive than the server originally shipped with, it is worth updating the controller firmware and checking that the controller supports drives of this size.

New HPE 785415-001

Choose New if the legacy server runs critical services and you want an unused spare ready to go. Condition and warranty details for New units are listed on the product page.

Refurbished HPE 785415-001

Refurbished units are an economical way to support older servers that are near the end of their planned life. The product page explains the condition and warranty for each Refurbished unit.

Compatibility

• HPE ProLiant DL580 G7 and DL585 G7 rack servers
• HPE ProLiant DL980 G7
• HPE ProLiant BL620c G7 and BL685c G7 blades
• HPE Integrity BL860c i4

These systems are named in listings for the matching 785079-B21 kit. Other SFF G7 servers may also work. Please confirm your server model, controller and the label on the drive you are replacing before ordering. This spare is not designed for Gen8 or newer SmartDrive bays.

Related Part Numbers

The matching option kit is HPE 785079-B21. If your server is a Gen8, Gen9 or Gen10 model, look instead at the SmartDrive Carrier 1.2TB drives, such as HPE 781518-B21 and its spare HPE 781578-001.

• HPE 781514-002: a 1.2TB 2.5 inch drive listing
• HPE 796365-004: another 1.2TB 2.5 inch drive listing
• HPE 718162-B21: a 1.2TB 2.5 inch dual-port drive listing

Replacement Checklist

• Your server is G7 or older and has 2.5 inch SFF bays.
• The old drive shows 785415-001, 785079-B21, 768788-004 or 785087-007.
• The failed drive is 1.2TB, 10K and SAS.
• The controller firmware is up to date.
• You have a recent backup of the affected volumes.

Replace The Drive Or Move The Workload?

For an ageing server, a drive failure is a good prompt to review the plan. If the system still has a clear role, replacing the drive with a matched spare restores protection quickly and costs far less than new hardware. If migration is already scheduled, a replacement drive buys time to finish it without running on a degraded array.

Buying HPE 785415-001 in the UK

Euroland sources current and legacy HPE parts for UK organisations, IT teams, resellers and repair firms. See the product page for the latest condition, warranty, stock and delivery information on the 785415-001. UK mainland shipping is free once an order exceeds £100 + VAT. Send our team your server model and the numbers from the current drive for a compatibility check, or phone 0203 209 6002.

785415-001 FAQs

Is the HPE 785415-001 compatible with ProLiant Gen8 servers?

No, HPE PartSurfer lists 785415-001 for Gen7 or earlier models, and Gen8 to Gen10 servers use SmartDrive Carrier drives such as the 781578-001 spare.

What is the option kit for spare 785415-001?

The matching option kit is 785079-B21, for the same 1.2TB 12G SAS 10K SFF dual-port Enterprise drive.

Do you offer the 785415-001 New and Refurbished?

Yes, subject to stock, with New suited to critical systems and Refurbished suited to budget-conscious support of older servers.

What warranty applies to the 785415-001?

Warranty terms for each condition are stated on the product page, and our sales team can confirm them.

Is free UK delivery available on the 785415-001?

Yes, orders over £100 + VAT receive free delivery to UK mainland addresses.