No products in the basket.
| Part Number: | 876127-001 |
|---|---|
| Manufacturer: | HPE |
| Backup & Storage: | Storage Controller |
| Model: | MSA 2050 |
| Description: | Buy HPE 876127-001 MSA 2050 SAN Controller. Genuine part with fast worldwide shipping from Euroland IT Store UK. |
| Availability: | In Stock |
HPE 876127-001 is a SAN controller module for the HPE MSA 2050 storage array. It slides into one of the two controller bays at the rear of the enclosure and handles host connections, RAID, caching and the link to any additional disk enclosures.
The MSA 2050 SAN is built as a dual-controller array. When one module fails, its partner takes over the workload, but the system loses its redundancy and cache mirroring until a healthy replacement is fitted. A spare 876127-001 lets you return the array to full protection quickly.
We offer this controller in New and Refurbished condition, subject to stock. Pick the option you want on this page to see the current price and the condition notes for that choice.
Each SAN controller has four host ports. HPE calls them converged because the protocol depends on the SFP+ module you fit: 8Gb or 16Gb Fibre Channel, 1GbE iSCSI or 10GbE iSCSI. HPE sells the transceivers separately in packs of four, for example C8R24B for 16Gb FC, C8R25B for 10Gb iSCSI and C8S75B for 1Gb RJ-45 iSCSI. For 10GbE iSCSI, direct attach copper cables can be used in place of SFPs.
HPE QuickSpecs state that each controller takes two or four SFPs and that both controllers must be populated the same way. When you swap a controller, move the transceivers from the failed module across so the port layout matches its partner. The controller does not ship with SFPs unless a listing says otherwise.
Both controllers in an MSA 2050 must run the same firmware. MSA 2050 firmware uses the VL-series naming, such as VL270P008. HPE replacement guidance for the MSA 1050 and 2050 says to keep Partner Firmware Update (PFU) enabled at all times, so the array brings the new module to the same firmware level as the surviving controller during the swap.
Before you start, confirm the fault from the event log and the controller LEDs, note the system settings and host mappings from the management interface, and plan the work for a quiet period. HPE also notes that online controller firmware upgrades need multipath software on the hosts, which is good practice for any SAN controller change.
The controller holds 8GB of cache. Cache contents are protected by supercapacitors and a CompactFlash card instead of a battery, so there is no cache battery to replace. In virtual storage mode the MSA 2050 supports RAID 1, 5, 6 and 10, with RAID 0 used for read cache only. One SAS expansion port connects disk enclosures, and the array scales to seven expansion enclosures for up to 192 SFF or 96 LFF drives.
Choose New if you want an unused module for a production array or a spares kit. The exact condition and warranty are displayed when New is selected.
Choose Refurbished for a previously used module at a lower cost. Its condition and warranty details are displayed when Refurbished is selected.
| Specification | Details |
|---|---|
| Part number | 876127-001 |
| Related number | 876127-002 (listed by resellers for the same MSA 2050 SAN controller) |
| Product type | SAN controller module (FC and iSCSI) |
| Host ports | 4 x SFP+ converged ports per controller |
| Host protocols | 8Gb or 16Gb FC, 1GbE or 10GbE iSCSI, depending on SFP |
| Cache | 8GB per controller |
| Cache protection | Supercapacitors and CompactFlash, battery-free |
| Expansion | 1 x SAS expansion port (SFF-8088 connector per spares listings) |
| Management | RJ-45 Ethernet management port, mini-USB CLI port |
| RAID (virtual storage) | RAID 1, 5, 6, 10; RAID 0 for read cache |
| Maximum drives per array | 192 SFF or 96 LFF |
| Firmware family | VL-series MSA 2050 firmware |
| Condition options | New, Refurbished |
UK delivery is available, with options shown at checkout. If you would like the part checked against your system, send us the array model, serial number and the details printed on the controller label.
Resellers list both numbers for the same MSA 2050 SAN controller and sell them as matching parts. HPE does not publish the reason for the suffix change, so send us both labels if you want us to check before ordering. Firmware on the two modules must match, which PFU handles during the swap.
No, unless the listing says so. Move the SFPs from the failed controller, or buy matching HPE MSA FC or iSCSI transceivers, because both controllers need the same SFP layout.
Yes. The MSA 2052 SAN uses the same SAN controller hardware as the MSA 2050 SAN. It does not suit MSA 2050 SAS models or the newer MSA 2060.
New is an unused module and Refurbished is a previously used module at a lower price. Condition and warranty for each are shown when you select the option on the product page.
Add the option you need and the UK delivery choices appear at checkout. For a check or a quote, contact us with the array serial number and the controller label details.
You must be logged in to post a review.
Reviews
There are no reviews yet.