No products in the basket.
| Part Number: | 843307-001 |
|---|---|
| Manufacturer: | HPE |
| Servers Spare Parts: | Server Motherboard |
| Model: | DL380/DL360 G9 V4 |
| Description: | Buy HPE 843307-001 DL380 G9 System Board. Genuine part with fast worldwide shipping from Euroland IT Store UK. |
| Availability: | In Stock |
843307-001 is the HPE spare number for the Gen9 system board that supports both Intel Xeon E5-2600 v3 and E5-2600 v4 processors. The same board is shared by the 2U ProLiant DL380 Gen9 and the 1U ProLiant DL360 Gen9, so one spare covers both models.
The number matters because HPE also issued a v3 only Gen9 board. HPE’s own support staff have confirmed in the HPE community that 843307-001 handles v3 and v4 chips, while the earlier 775400-001 is limited to v3. If your server runs Broadwell (v4) processors, or you plan to upgrade to them, this is the board family to look for.
We list 843307-001 as New and Refurbished, subject to stock. Choose an option on the page to view its condition and warranty.
HPE Gen9 boards carry both an assembly number (on the board) and a spare number (for ordering). The main pairings reported for the DL360 and DL380 Gen9 are:
| Spare number | Assembly number | Processor support |
|---|---|---|
| 775400-001 | 729842-001 | E5-2600 v3 only |
| 843307-001 | 729842-002 | E5-2600 v3 and v4 |
| 878936-001 | 729842-002 | E5-2600 v3 and v4 |
| P02757-001 | 729842-003 | Described by HPE as the functional equivalent of 843307-001 |
So if the label on your failed board reads 729842-002, 843307-001 is a direct match. A board with assembly 729842-001 is the v3 only version, and 843307-001 is the way to add v4 support when replacing it.
The board takes one or two processors in LGA2011-3 sockets. With v4 processors, DDR4 memory can run at up to 2400MT/s, and the 24 slots allow up to 3TB using 128GB LRDIMMs. Use the same processor model in both sockets and do not mix RDIMMs with LRDIMMs.
Before fitting v4 chips, update the system ROM to a release that supports them. HPE also points out that some v4 processors need high performance heatsinks in the DL380 Gen9, so check the processor wattage against the heatsink you have.
The spare board comes without processors or memory. Transfer the processors and heatsinks, all DIMMs in their original slots, the riser cages, the FlexibleLOM adapter and any Smart Array controller and battery. On first boot, use the ROM-Based Setup Utility or UEFI System Utilities to re-enter the serial number and product ID from the chassis label, then confirm the iLO 4 firmware and system ROM are current.
Select New for a board that has not been in service before. Condition and warranty details for this option are shown on selection.
Select Refurbished for a previously used board at a lower cost. Its condition and warranty details are displayed once chosen.
| Specification | Details |
|---|---|
| Spare part number | 843307-001 |
| Assembly number | 729842-002 |
| Servers | HPE ProLiant DL380 Gen9, HPE ProLiant DL360 Gen9 |
| Processor sockets | 2 x LGA2011-3 |
| Processor support | Intel Xeon E5-2600 v3 and E5-2600 v4 |
| DIMM slots | 24 |
| Memory type | DDR4 RDIMM or LRDIMM |
| Maximum memory | 3TB with 128GB LRDIMMs |
| Top memory speed | 2400MT/s with v4 processors |
| Management | iLO 4 |
| Related spares | 775400-001 (v3 only), 878936-001, P02757-001 |
843307-001 suits the HPE ProLiant DL380 Gen9 in all its drive bay layouts and the HPE ProLiant DL360 Gen9. It does not fit Gen8 servers such as the DL380p Gen8, which use DDR3 and the board covered on our HPE 801939-001 DL380p Gen8 motherboard page.
UK delivery is available, with options shown at checkout. Contact us with your server model, serial number and the assembly and spare numbers on your current board and we will help you confirm the match.
Yes. HPE has confirmed that 843307-001 supports both v3 and v4 processors, unlike the earlier v3 only spare 775400-001. Update the system ROM before fitting v4 chips.
Yes. 843307-001 is a shared system board used by both the DL380 Gen9 and the DL360 Gen9.
729842-002 is the assembly number paired with 843307-001, so it is a like for like match. Send us a photo of the label if you want a second check.
Re-enter the serial number and product ID from the chassis label, then check that the system ROM and iLO 4 firmware are on current releases.
New and Refurbished are listed, subject to stock, with condition and warranty shown when you pick one. UK delivery is available and options are shown at checkout.
You must be logged in to post a review.
Reviews
There are no reviews yet.